<form id="ntrpr"><span id="ntrpr"><th id="ntrpr"></th></span></form>
<form id="ntrpr"></form>

<address id="ntrpr"></address><address id="ntrpr"></address>

    <noframes id="ntrpr">

      <address id="ntrpr"></address><noframes id="ntrpr">
      <address id="ntrpr"><form id="ntrpr"><th id="ntrpr"></th></form></address>
        東莞市創億嘉潤滑油有限公司 服務熱線:0769-81283290 13725804996
        快捷 高效 周到 貼心 全心全意為客戶服務 工業潤滑油、工業潤滑脂、工業潤滑劑咨詢熱線:13725804996 電話:0769-81283290
        美孚潤滑油 殼牌潤滑油 嘉實多潤滑油
        BP潤滑油 福斯潤滑油 加德士潤滑油
        克魯勃潤滑油 道達爾潤滑油 埃索潤滑油
        協同潤滑油 出光潤滑油 摩托瑞斯潤滑油
        • 東莞創億嘉潤滑油有限公司

          電話:0769-81283290

          聯系人:劉超

          手機:13725804996

          企業QQ:1352876343

          郵箱:1352876343@qq.com

          網址:www.by1269.cn

          地址:廣東省東莞市南城區高新產業園區宏一路

          郵編:523073

        聯系方式
        殼牌潤滑油系列 > 殼牌航空潤滑油 > AEROSHELL FLUID 31
        AEROSHELL FLUID 31 詳細說明 (瀏覽1415次)
        AEROSHELL FLUID 31
        AeroShell Fluid 31 is a synthetic hydrocarbon based aircraft hydraulic fluid
        with greatly improved fire resistance characteristics when compared with
        conventional petroleum products.
        AeroShell Fluid 31 has a specially designed base stock which imparts a
        relatively high flash point, excellent low temperature properties and good
        oxidation and thermal stability. In addition, AeroShell Fluid 31 is formulated
        with high technology additives to provide oxidation and corrosion
        resistance, antiwear, and anti-foaming protection.
        AeroShell Fluid 31 is superclean filtered to ensure optimum performance in
        particulate monitored systems.
        AeroShell Fluid 31 is dyed red.
        The useful operating temperature range is –40 to +205°C.
        APPLICATIONS
        AeroShell Fluid 31 is recommended for use in aircraft, ordnance, and
        missile systems operating from –40°C to +205°C . This fluid should be
        considered for use in auto pilots, shock absorbers, brakes, flight control
        systems, hydraulic servo-controlled systems and other systems using
        synthetic elastomer seals.
        An increasing number of aircraft manufacturers now recommend use of this
        type of fluid in aircraft hydraulic systems in preference to mineral hydraulic
        oils. This move has been prompted by need to use fluids with better fire
        resistant properties.
        AeroShell Fluid 31 is also approved for use in the Honeywell (formerly
        Garrett) cooling turbine (cabin air compressors).
        Increasingly this type of hydraulic fluid is being adopted for use in
        hydraulic systems of military aircraft in place of mineral hydraulic fluids.
        AeroShell Fluid 31 is a synthetic hydrocarbon oil and should not be used in
        contact with incompatible seal materials. Refer to the General Notes at the
        front of this section for further information.
        AeroShell Fluid 31 is compatible with AeroShell Fluids 4, 41, 51, 61 and
        71 and can be used in systems designed to operate with MIL-PRF-5606,
        MIL-PRF-6083, MIL-PRF-87257 and MIL-PRF-46170 fluids.
        Chlorinated solvents should not be used for cleaning hydraulic components
        which use AeroShell Fluid 31. The residual solvent contaminates the
        hydraulic fluid and may lead to corrosion.
        www.shell.com/aviation
        190
        Hydraulic Fluids
        SPECIFICATIONS
        U.S. Approved MIL-PRF-83282D
        British (MIL-PRF-83282D)
        French Equivalent to DCSEA 437/A
        Russian –
        NATO Code H-537
        Joint Service Designation OX-19
        PROPERTIES MIL-PRF-83282D TYPICAL
        Oil type Synthetic Synthetic
        Hydrocarbon Hydrocarbon
        Kinematic viscosity mm
        2
        /s
        @ 205°C 1.0 min 1.07
        @ 100°C 3.45 min 3.53
        @ 40°C 14.0 min 14.33
        @ –40°C 2200 max 2098
        Flashpoint
        Cleveland Open Cup °C 205 min 237
        Fire Point °C 245 min 251
        Total Acidity mgKOH/g 0.10 max 0.01
        Evaporation loss 6.5 hrs
        @150°C % m 20 max 10
        Relative density @ 15.6/15.6°C Report 0.850
        Pourpoint °C –55 max Below –55
        Table continuedNOTES
        The AeroShell Book
        Edition 18 2003
        193
        Hydraulic Fluids
        www.shell.com/aviation
        192
        Hydraulic Fluids
        PROPERTIES MIL-PRF-83282D TYPICAL
        Low temperature stability
        72 hrs @ ?40°C Must pass Passes
        High temperature stability
        100 hrs @ 205°C Must pass Passes
        Gravimetric Filtration, mg/100ml 0.3 max 0.2
        Filtration time minutes 15 max Less than 15
        Particle Count, Automatic, per Lt
        5 to 15 μm 10000 max 1331
        16 to 25 μm 1000 max 190
        26 to 50 μm 150 max 55
        51 to 100 μm 20 max 4
        >100 μm 5 max 0
        Water content ppm 100 max 82
        Foam resistance ASTM Seq 1 Must pass Passes
        Flame propagation cm/s Must pass Passes
        Rubber swell, NBR-L % 18 to 30 Passes
        4-Ball Wear, 1 hr @ 75°C
        scar dia, mm
        1 kg load/1200 rpm 0.21 max 0.18
        10 kg load/1200 rpm 0.30 max 0.24
        40 kg load/1200 rpm 0.65 max 0.50
        Oxidation & corrosion stability
        168 hrs @ 121°C
        – metal weight change Must pass Passes
        – viscosity change @ 40°C % 10 max Less than 10
        – change in acidity mgKOH/g 0.2 max Less than 0.02
        Flammability Must pass Passes
        A viscosity/temperature curve is shown at the end of this section.
        上一產品:AEROSHELL SSF AND LGF/起落架液壓油Hydraulic Fluids
        下一產品:AEROSHELL CALIBRATING FLUID 2
        版權所有:東莞市創億嘉潤滑油有限公司   粵ICP備19160599號
        工業齒輪油生產廠家,想了解批發價格,用途,哪個牌子好,品牌哪家好請聯系我們.
        工業潤滑油
        国产片**aa毛片视频